Updated: Mar 20th, 2023
  • Applicable Products: SwitchBot Hub2
  • SwitchBot App Version: V6.24 or newer

1. Make sure that you have the latest SwitchBot app.

2. Make sure the temperature/humidity sensor's air vent is not blocked.


3. The temperature/humidity sensor should not be near any heat sources or other objects that affect temperature and humidity.

4. There is an option for "Temperature/Humidity Calibration" on the Hub 2 setup screen. For calibration, please follow the application's instructions.


5. After calibration, wait a while before checking the temperature and humidity.

6. If the above does not resolve the issue, please sign in to the SwitchBot application and click on the Profile > Feedback button.


1 comment

  • Yalemarc

    The issue is not calibration it is display on the unit. The app has been switched to F and displays correctly but the unit itself continues to display in C and does not change even if reboot. This is not covered at all in you FAQ which also shows additional incorrect configuation data.


Please sign in to leave a comment.