What Should I Do if Hub 2 Beeps often?

• Related Products: Hub 2

1. If you want to completely turn off the buzzer alarm, please check the following settings:

   Go to SwitchBot App > Hub 2 > gear icon in the upper right corner > Alarm Settings. Check whether the alarm feature is turned off. If the alarm feature is turned on, make sure the alarm method is not set to Sound and Light Flashing Mode.

2. Make sure the network connected to Hub 2 is stable. Hub 2 may beep when it goes offline or comes back online.
3. Check the Hub 2 power cable, power adapter, and power outlet to rule out beeping caused by frequent power disconnection and reconnection.

If Hub 2 is not using Sound and Light Flashing Mode, and there is no issue with the power cable, power adapter, or power outlet, please try the following:

1. In the SwitchBot App, press and hold Hub 2 to delete it.
2. Unplug the Hub 2 power cable and power adapter, then plug them back in.
3. Press and hold the On and Off buttons on Hub 2 for 15 seconds to reset it.
4. Add Hub 2 to the SwitchBot App again.

Note: Deleting or resetting Hub 2 will not affect existing manual scenes or automations, and it will not delete previously learned remotes.