Add SwitchBot Safety Alarm to SwitchBot App

• Related Product: SwitchBot Safety Alarm
• SwitchBot App Version：9.13 or newer

1. Make sure your SwitchBot App version is up to date.

2. Add Safety Alarm to SwitchBot App in the following order:

• Launch SwitchBot App and log in.
• Tap "+" in the upper right corner.
• Tap "Add Device".
• Tap "Safety Alarm" under security.
• Unscrew and remove the battery cover.
• Insert two coin batteries with the + mark facing upwards.
• Press the button on the Safety Alarm for 2 seconds until the indicator flashes, then tap "Connect Device".
• The SwitchBot App will automatically discover and connect to the device.
• There might be a prompt to upgrade the firmware. Please don't hesitate to upgrade.
• If you are using an iPhone, you will get a message asking if you have added the Safety Alarm to the Find My application.
• Name your device and pick a room, then tap "next".
• Turn on the required permission.

If you have any questions, please contact us via SwitchBot App -> Profile -> Support ->Feedback.