Skip to main content

How to Connect SwitchBot Devices to Third-Party Platforms (Matter over Wi-Fi)

SwitchBot Customer Support
Certain SwitchBot products can act as Matter accessories or bridge devices, enabling direct integration with platforms like Google Home or Apple Home. Below is the process for adding a SwitchBot Air Purifier to Google Home and Apple Home.
 

Add to Google Home

Step 1: Verify Matter setup requirements.

A Matter-supported hub/controller is required (e.g., Google Nest devices). Ensure you’re logged into your Google account on one of the following compatible devices.
Note: Update the device’s firmware to the latest version to ensure full Matter support.

Google controllers.png

For detailed compatibility information, refer to Google’s official guides: https://support.google.com/googlenest/answer/12391458?hl=en
 

Step 2: Put the SwitchBot device into Matter setup mode.

Before adding the device to Google Home, click Connect Device in the app to put the device into the Matter setting state.

Google Home Step 2.png

Step 3: Add Air Purifier to Google Home.

  1. Copy the Matter pairing code from the relevant page in the SwitchBot app.

Step 3.png

 
  1. Open the Google Home app, tap Devices in the navigation bar at the bottom, then tap "+" in the bottom right-hand corner. Select Matter-enabled device. Once the device is detected, tap Next to navigate to the QR code scanning page.

    Open Google Home.png

  2. Tap Set up without QR code, paste the copied Matter pairing code in the field, then tap Next. After a short wait, your SwitchBot device will be added to the Google Home app.

Scan Code_Google Home.png

Add to Apple Home

Step 1: Verify Matter setup requirements.

A Matter-supported hub/controller is required (e.g., Apple HomePod, Apple TV). Ensure you’re logged into your Apple ID on one of these compatible devices.
Note: Update the device’s firmware to the latest version to ensure full Matter support.

Apple controllers.png

For detailed compatibility information, refer to Apple’s official guides: https://support.apple.com/en-us/102135
 

Step 2: Put the SwitchBot device into Matter setup mode

  • Before adding the device to Apple Home, tap the Connect Device button in the SwitchBot app to put the device into Matter setup mode.

Apple Home Step 2.png

Step 3: Add the SwitchBot device to Apple Home.

  1. Copy the Matter pairing code from the relevant page in the SwitchBot app.

    Step 3.png

  2. Open the Home app, tap "+" in the top right-hand corner. Choose Add Accessory, then tap More options > My Accessory Isn't Shown Here > Enter code. Paste the copied code and tap Continue to start the setup process.

Scan Code_Apple Home.png

 

 

Add to Samsung SmartThings

Step 1: Put the SwitchBot device into Matter setup mode.

  • Ensure your Samsung Hub has been added to SmartThings and is online. 
  • Power on the SwitchBot Matter device. Open the SwitchBot app, go to the device's settings page, and select Matter Setup. Follow the in-app instructions to reset the device and obtain the Matter pairing code.

Step 2: Add the SwitchBot device to SmartThings.

  • Open the SmartThings app, tap "+" in the top right-hand corner, then select Add device. 
  • Select Partner devices, then choose Matter. Tap Scan QR code to scan the Matter QR code from the SwitchBot app, or manually enter the setup code. 
  • Select the Wi‑Fi network, enter the password, and wait for the setup to complete.
    Step 2 ST.png

Related articles

Comments

0 comments

Please sign in to leave a comment.