How to Re-pair SwitchBot Robot Vacuum K11+ with the Auto-Empty Station

• Related Product: SwitchBot Robot Vacuum K11+

1. Make sure that the auto-empty station is powered on.

2. Make sure that the K11+ is powered on by removing the main unit's faceplate and switching the power to I.

3. Manually dock the K11+ to the auto-empty station and make sure the charging terminals are fully contacted.

4. Press the home button on the main unit of the K11+ for 6 seconds, and you will hear a voice from the K11+ saying, "Entering Bluetooth pairing mode".

5. Open the lid of the auto-empty station and long press the Bluetooth button for 6 seconds. The indicator on the auto-empty station will change from orange to flashing white to enter the Bluetooth pairing mode.

6. Wait 5 to 10 seconds, then the K11+ will announce the success of Bluetooth pairing.

7. If pairing fails, restart the K11+ and try again following the steps above.