How to Re-pair the Robot Vacuum K10+ Pro Combo with the Dual Empty Station

Last Updated: 2024 Nov 29

• Related Product: SwitchBot Robot Vacuum K10+ Pro Combo
• SwitchBot App Version：9.4 or newer

1. Make sure that the robot vacuum dual empty station is powered on.

2. Make sure that the K10+ Pro Combo is powered on by removing the main unit's faceplate and switching the power to I.

3. Manually dock the K10+ Pro Combo to the dual empty station.

4. Open the lid of the dual empty station and long press the Bluetooth reset button for 6 seconds. The indicator on the dual empty station will flash white quickly to enter Bluetooth pairing mode.

5. Press the home button on the main unit of the K10+ Pro Combo for 6 seconds, and you will hear the K10+ Pro Combo saying entering Bluetooth pairing mode.

6. Wait 5 to 10 seconds, then the K10+ Pro Combo will announce the success of Bluetooth pairing.

7. If pairing fails, restart the K10+ Pro Combo and try again following the steps above.