How to Show SwitchBot Outdoor Meter's Temperature and Humidity Data on SwitchBot Meter Pro/CO2 Monitor Screen

Last Updated: 2024 Nov 28

• Related Product: SwitchBot Outdoor Meter, SwitchBot Meter Pro, SwitchBot Meter Pro (CO2 Monitor)
• SwitchBot App Version: 9.4 or newer

1. Make sure your SwitchBot App version is up to date.

2. Make sure your Meter Pro/CO2 Monitor and Outdoor Meter have been added to your App and within Bluetooth range of each other.

3. Change the temperature and humidity sources in the following order.

• Launch SwitchBot App and log in.
• Tap Meter Pro/CO2 Monitor.
• Tap gear icon in the upper right corner.
• Tap "Panel Display".
• Tap "Temp and Humidity Source".
• Choose Main or Secondary.
• Set data source to Outdoor Meter.
• Go back to the previous catalog level , tap "Panel Icons", then select the "Outdoor" icon.
• With the above settings, you can view the Outdoor Meter's temperature and humidity data on the Meter Pro/CO2 Monitor screen.

Note: If your Outdoor Meter and Meter Pro are located far apart or even in different places, you will need to place separate Hubs next to the two devices to network them in order to achieve the setup method in this post.

4. If you have any questions, please contact us via SwitchBot App -> Profile -> Support ->Feedback.

SwitchBot Hub Products: SwitchBot Hub Mini, SwitchBot Hub 2, SwitchBot Hub Mini Matter Enabled