How to Recover the Firmware of SwitchBot Meter Pro

Last Updated: 2024 Nov 06

• Related Product: SwitchBot Meter Pro, SwitchBot Meter Pro (CO2 Monitor)
• SwitchBot App Version：9.3 or newer

1. Make sure your SwitchBot App version is up to date.

2. If the Meter Pro doesn't respond, or the firmware upgrade fails, try to recover the firmware of your Meter Pro.

3. Follow the instructions below to recover the firmware of the Meter Pro.

• Remove the batteries from the Meter Pro. (For CO2 Monitor, if you are using a usb cable, unplug it first.)
• Press the button on the top of the Meter Pro while reinserting the batteries. (For CO2 Monitor, if using a USB cable, press the button while plugging in the charging cable.)
• Go to SwitchBot App -> Profile -> Firmware Recovery -> Recover

4. If you have any questions, please contact us via SwitchBot App -> Profile -> Support ->Feedback.