Last Updated: 2024 Oct 10
- Related Products: SwitchBot Meter Pro
- SwitchBot App Version: 9.1 or newer
1. Make sure your SwitchBot App version is up to date.
2. Make sure your Meter Pro has been added to your App.
3. Setup alert conditions in the following order.
- Launch SwitchBot App and log in.
- Tap Meter Pro.
- Tap the gear icon in the upper right corner.
- Tap "Alert Conditions".
- Enable and set the alert range for temperature, humidity, absolute humidity, dew point, and VPD as needed.
- Enable "Alert Sound & Light" if you would like the screen to flash or an alarm to sound when the alert setpoint is reached.
4. If you wish to reflect alerts from other SwitchBot Meters on the Meter Pro side, the following settings are required and we'll use Meter Plus as an example to explain this.
4-1. Set up alert conditions on the Meter Plus settings screen.
- Launch SwitchBot App and log in.
- Tap Meter Plus.
- Tap the gear icon in the upper right corner.
- Tap “Alert conditions” on the Settings screen.
- Enable alerts for temperature, humidity, absolute humidity, dew point temperature, and VPD as desired.
- Set and save the alert range.
4-2. Add the Meter Plus to Meter Pro display view.
- Launch SwitchBot App and log in.
- Tap Meter Pro.
- Tap the gear icon in the upper right corner.
- Tap "Panel Display".
- Tap "Temp and Humidity Source".
- Choose Main or Secondary.
- Set data source to Meter Plus.
4-3. Enable the "Alert Sound & Light" of Meter Pro.
5. If you have any questions, please contact us via SwitchBot App -> Profile -> Support ->Feedback.
Comments
0 comments
Please sign in to leave a comment.