Use SwitchBot Contact Sensor to Trigger SwitchBot Lock Pro to Lock Automatically via Bluetooth

Last Updated: 2024 Oct 25

• Related Products: SwitchBot Contact Sensor, SwitchBot Lock Pro
• SwitchBot App Version: 9.2 or newer
• Firmware Version: Contact Sensor 1.7 or newer

1. Make sure your SwitchBot App version is up to date.

2. Make sure SwitchBot Contact Sensor and Lock Pro have been added to your App and your device firmware version is up to date.

3. You can set a Local linkage to use the Contact Sensor to Lock your Lock Pro via Bluetooth in the following order:

• Launch SwitchBot App and log in.
• Tap the Contact Sensor.
• Tap "Automation".
• Tap "Local Linkage".
• Tap "+" icon at the bottom of the screen.
• Add a condition such as door status is closed.
• Select Lock the Lock Pro as the action and save it.

4. After making the above settings, your Lock Pro will be locked when the Contact Sensor detects the door is closed.

5. If you have any questions, please contact us via SwitchBot App -> Profile -> Support ->Feedback.

Note:

• When installing the SwitchBot Pro, if the distance from the Lock Pro unit to the magnet cannot be held within 4cm, you may encounter issues with using the auto-lock feature smoothly. In such cases, you can attempt to trigger automatic locking by employing this alternative method.
• To avoid any interference, disable the Auto-Lock feature of SwitchLock Pro when using this method.
• Currently, unlock action is not available.
• Locking SwitchBot Lock is not supported by this function.