How to Re-pair the Mini Robot Vacuum K10+ Pro with the Auto-empty Station

Last Updated: 2024 Sep 03

• Related Product: SwitchBot Mini Robot Vacuum K10+ Pro

1. Make sure that the auto-empty station is powered on.

2. Make sure that the K10+ Pro is powered on by removing the main unit's faceplate and switching the power to I.

3. Manually dock the K10+ Pro to the auto-empty station and make sure the charging terminals are fully contacted.

4. Open the lid of the auto-empty station and long press the Bluetooth reset button for 6 seconds. The indicator on the auto-empty station will flash white quickly to enter Bluetooth pairing mode.

5. Press the home button and LDS laser radar on the main unit of the K10+ Pro for 15 seconds, and the K10+ Pro will be entering Bluetooth pairing mode.

6. The indicator on the auto-empty station will flash rapidly three times with a white light to indicate successful Bluetooth pairing, and then it will return to its original state*.

7. After the auto-empty station enters Bluetooth pairing mode, it will automatically exit if the pairing process is not initiated within 120 seconds (the white light of the auto-empty station goes out). If pairing fails, restart the K10+ Pro and try again following the steps above.

Note:
When you press the Bluetooth reset button on the auto-empty station for 6 seconds and then close the lid, the indicator will turn white once Bluetooth pairing is complete. If you press the Bluetooth reset button for 6 seconds and leave the lid open, the indicator will turn orange when Bluetooth pairing is complete.