- SwitchBot App Version: 9.6 or newer
1. To add devices below to the iOS widget, you need iOS 18+ and SwitchBot App V9.6 or newer.
| Device | Action | Note |
| SwitchBot Scene | NA | |
| Bot | Press or on/off | Press mode, Switch mode, and customize mode are all supported. |
|
Air Purifier
|
on/off | |
|
Air Purifier Table
|
on/off | |
|
Battery Circulator Fan
|
on/off | SwitchBot Hub required. |
|
Blind Tilt
|
fully open/close down/close up | SwitchBot Hub required. |
|
Ceiling Light
|
on/off | |
|
Ceiling Light Pro
|
on/off | |
|
Circulator Fan
|
on/off | SwitchBot Hub required. |
|
Color Bulb
|
on/off | |
|
Curtain
|
open/close (based on your own settings) | SwitchBot Hub required. |
|
Curtain 3
|
open/close (based on your own settings) | SwitchBot Hub required. |
|
Evaporative Humidifier
|
on/off | |
|
Evaporative Humidifier(Auto-refill)
|
on/off | |
|
Floor Cleaning Robot S10
|
clean/recharge/switch mode between mop and Vac&Mop | |
|
K10+/K10+ Pro/K10+ Pro Combo
|
clean/recharge | |
|
Lock
|
lock/unlock | SwitchBot Hub required. |
|
Lock Pro
|
lock/unlock | SwitchBot Hub required. |
|
Hub 2
|
temperature/relative humidity/absolute humidity/dew point/VPD/room light | |
|
Meter
|
temperature/relative humidity/absolute humidity/dew point/VPD | SwitchBot Hub required. |
|
Meter Plus
|
temperature/relative humidity/absolute humidity/dew point/VPD | SwitchBot Hub required. |
|
Meter Pro
|
temperature/relative humidity/absolute humidity/dew point/VPD | SwitchBot Hub required. |
|
Meter Pro (CO2 Monitor)
|
temperature/relative humidity/absolute humidity/dew point/VPD/CO2 | SwitchBot Hub required. |
|
Outdoor Meter
|
temperature/relative humidity/absolute humidity/dew point/VPD | SwitchBot Hub required. |
|
Plug
|
on/off | |
|
Plug Mini
|
on/off | |
|
Roller Shade
|
open/close | SwitchBot Hub required. |
|
Strip Light
|
on/off | |
|
Smart Switch 1PM
|
on/off |
SwitchBot Hub Products: SwitchBot Hub Mini, SwitchBot Hub 2, SwitchBot Hub Mini Matter Enabled
2. Way to add Widgets on your iPhone:
1. Add SwitchBot devices and scenes by going to SwitchBot App -> Profile -> Widget Settings.
2. Add widgets in the following order on your iPhone.
- Touch and hold an empty area on the Home Screen until the apps jiggle.
- Tap "Edit" in the upper left corner.
- Tap "Add Widget".
- Input SwitchBot and Search.
- Follow the on-screen steps to add your devices to the Widget.
To learn more about iOS widgets, you can find them here.
3. Notes:
- All of the above are also supported on Android phones.
- Starting from SwitchBot App V9.5, members can now control the homeowner's devices using widgets.
- Starting from iOS 18, legacy widgets are no longer supported. For detailed information about this change, we recommend contacting Apple directly.
Comments
0 comments
Please sign in to leave a comment.