SwitchBot Color Bulb power failure recovery function

You can set the states of the Color Bulb after it is turned off or restored from a sudden power failure.

Please refer to the below picture.

(1) Set "Turn On".
After the power is restored, the Color Bulb will automatically turn on and the status of the Color Bulb will be the previous state of turning on.
For example:
If you set the Color Bulb to "ON | 1% color" before the power is cut or sudden power failure occurs, the Color Bulb status will automatically return to "ON | 1% color" after the power is restored.

※ This setting is not recommended for use in bedrooms, as the Color Bulb will turn on immediately after the power is restored.

(2) Set "Turn Off".
After the power outage is restored, the smart bulb will stay off automatically.

※ If the Color Bulb does not turn on after the power is restored, please check if you have set "Turn Off" in this setting.

(3) Set "Keep previous state" (default setting)
After a power outage is restored, the Color Bulb will automatically return to the state it was in just before the power was turned off or cut off.
For example:
If the state before the power was cut or sudden power failure was "On | 1% color", the state of the smart bulb will automatically return to "On | 1% color" after it is restored.

If the status before power off or sudden power failure is "Off", the status of the smart bulb will automatically return to "Off" after it is restored.