How to Install the SwitchBot Contact Sensor on a Sliding Door

1. Single sliding door

① Attach the Contact Sensor to the wall.
② Attach the magnet to the door frame.

※Please note:

-Install the Contact Sensor and the magnet with their bottom edges aligned.
-Keep the distance between the Contact Sensor and the magnet within 30 mm.

2. Double sliding door

-Attach the Contact Sensor and magnet to the door frame, aligning the bottom edge of the Contact Sensor and magnet as shown in the figure below.

-Note: Keep the distance between the Contact Sensor and magnet within 30mm.