How to Set up SwitchBot Lock

Last Updated: 2024 Feb 22

• Related Products: SwitchBot Lock
• SwitchBot App Version: 8.0 or newer

1. Make sure your SwitchBot App version is up to date.

2. Please set up in the following order.

• Launch the SwitchBot App and log in.
• Tap the "+" icon in the upper right corner and tap "Add device."
• Tap "Lock" under "Security."
• Remove the battery insulation seal. If re-adding, remove and reinsert the battery in the Lock. 
• The Lock's indicator light will slowly blink blue.
• Tap "Next" on the SwitchBot App.
• Once the device has been connected, add the Lock's name and room to your favorites and tap "Next."
• In the SwitchBot App, you will be informed that the cloud service is enabled. Please don't hesitate to decide whether to connect to the Hub device.
• Installation instructions will be provided. Please go ahead and install the Lock according to the guidance.
• Tap "Calibrate unlock/lock position."
• You can follow the App's guidance to record the lock/unlock position.
• Unlocking test. 
• Lock test. 
• The setup is complete.

3. If you have any questions, please contact us via SwitchBot App > Profile > Help & Feedback >Feedback.