Updated: Jan 09th, 2023

  • Applicable Products: SwitchBot Remote
  • SwitchBot App Version: V6.21.1 or newer
  • Firmware Version: SwitchBot Remote V4.5 or newer, Hub Mini V3.9-2.6 or newer, Ceiling Light V1.3-0.4 or newer

1. Make sure your SwitchBot app is the latest version.

2. Please ensure that the SwitchBot Remote and the Hub Series products (Hub Mini / Ceiling Light) have been added to the SwitchBot app and that the firmware version is the latest. If you are not on Hub Mini V3.9-2.6 or newer / Ceiling Light V1.3-0.4 or newer, please log in to the SwitchBot app → Profile → Feedback.

3. Please update your Remote to firmware version V4.5.

*Related Posts: Remote Firmware Version Automatic Update

*Related Posts: SwitchBot Remote failed to update firmware

4. Please set the manual scene in advance.

5. Please set manual scenes on the convex/concave buttons.

  • Tap the relevant remote button
  • Tap the convex/concave button
  • Tap Select scene for manual execution
  • Select the manual scene
  • Setting completed

___.png

6. Pressing the convex button/concave button enables manual scene execution.

Comments

0 comments

Please sign in to leave a comment.