Applies to: SwitchBot Hub 4
Add a compatible SwitchBot lock to the SwitchBot app before controlling it with Hub 4.
Step 1. Pair the lock
- Check that the lock is in the SwitchBot app.
- On the Hub 4 device page, tap Manage Screen → Manage Devices → + → Import Existing Appliances. Select the lock and tap Pair Now.
- Keep your phone, lock, and Hub 4 close together until pairing is complete.
Step 2. Set a PIN
Open the lock’s Instructions page and tap Unlock by Voice. Enter the four-digit PIN twice and save it.
Step 3. Unlock by voice
Wake Hub 4 and say the lock name and PIN. For example, say “Unlock the front door. The PIN is ‹your four-digit PIN›.” Once the PIN is verified, Hub 4 says “Unlocked.”
Troubleshooting
- Hub 4 didn’t catch the command. Wake it again and repeat the full lock name and PIN.
- Incorrect PIN. Check the PIN and try again.
Before using voice unlock, make sure Hub 4 is online and connected to the lock. You can also use voice commands to lock the door or check its status.
| What to do | What you can say |
|---|---|
| Lock | “Lock the front door.” |
| Unlock | “Unlock the front door.” |
| Check lock status | “Is the front door locked?” |
Comments
0 comments
Please sign in to leave a comment.