How to use Curtain 4’s automatic charging?

• Related Product: Curtain Track 4

We strongly recommend that you set up the automatic charging function for Curtain 4 when powered by solar panels.

1. Make sure your SwitchBot App version is up to date. Please make sure you have added Curtain 4 to your app and that your device firmware version is up to date.
2. Please make sure the solar panel is installed on Curtain 4 and the dark panel faces outdoors.
3. Please configure the automatic charging function in the following order.

Launch the SwitchBot App and enter the Curtain 4 page.

Scroll down the page and click "Automatic Charging" at the bottom of the page.

Turn on automatic charging and set the corresponding start time and end time, as well as the start and end positions.

If necessary, set the validity period and recurrence time.

QuietDrift Mode is automatically enabled. If not needed, turn it off.

Click Save. Subsequently, the device will periodically move to the charging position for charging, and return to the end position after charging is completed.

1. Please increase the automatic charging time as much as possible to ensure that the solar panel receives sufficient light. The excess power can be stored in the battery to cope with insufficient light due to poor weather.
2. If you have any questions, please contact us via SwitchBot App > Profile > Help & Feedback > Feedback.