- Related Product: Floor Cleaning Robot S30
- SwitchBot App Version: V10.11 or newer
- Make sure that the SwitchBot App is up to date.
- Turn on the Floor Cleaning Robot S30 Multi-Functional Station.
- Connect the device to Wi-Fi as follows:
- Open the SwitchBot App and sign in.
- Tap the
+icon in the upper-right corner, then tap Add Device. - Select Floor Cleaning Robot S30.
- Press and hold the robot's Return to Station button and Mode Switch button for 3 seconds. The S30 will announce, “Wi-Fi has been reset.”
- Tap Connect Device.
- The device will be detected automatically.
- Enter the SSID and password for a 2.4 GHz Wi-Fi network, then tap Next.
- When the network connection is complete, an “Added” message will appear. You can then set the device name and room.
- Mark the Water Station using either method below.
Method 1:
- Carry the S30 to the Water Station and manually dock it with the station.
- Wait for the robot to announce, “The robot has entered Bluetooth pairing mode,” followed by, “Paired with the Water Station successfully.”
- Briefly press the robot's Return to Station button. The robot will automatically mark the Water Station.
Method 2:
- Carry the S30 to the Water Station and manually dock it with the station.
- Wait for the robot to announce, “The robot has entered Bluetooth pairing mode,” followed by, “Paired with the Water Station successfully.”
- Open the SwitchBot App and select Floor Cleaning Robot S30.
- Tap Device Features in the lower-left corner.
- Tap Settings.
- Tap Mark Water Station Location.
- Drag the water-drop icon to the Water Station location and select its orientation.
- Tap Mark.
- S30 will automatically navigate to the Water Station to complete the marking process.
Comments
0 comments
Please sign in to leave a comment.