SwitchBot Color Bulb: Safety Notes

For your safety, please follow these instructions.

- Be sure to turn off the power when installing, removing or cleaning the bulb. (to avoid an electric shock).
- Do not use this product in insulated luminaires, luminaires with dimming functions, emergency lighting luminaires, induction lighting fixtures or HID luminaires (such as mercury lamps). (to avoid damage and smoke)
- Do not use this product in DC power. (to avoid damage and heating phenomenon)
- Do not touch the bulb while it is on or for a period of time after it is turned off. (To prevent causing burns).
- Do not cover with paper or cloth, and do not place near flammable materials.
- Do not damage the product by collision.
- Do not use the product in wet locations or under conditions where it may be exposed to water droplets. (To prevent damage or insulation failure)

Do not use this product in the following places. (Do not use it for insulated devices, emergency lighting, induction lamps or HID lamps).
- The Bulb must be securely mounted in the socket. (Do not install the Bulb in a socket where it may fall out)
- Do not stare at the Bulb for long periods of time when it is on.
- The product should only be used in a dry indoor environment.
-Do not use the metal lampshade, as this will affect the Wi-Fi signal strength of the Color Bulb.
- Do not use the physical dimmer switch of the lamp holder to control it. This may cause the smart bulb to be uncontrollable.
- Do not turn it off via the physical switch on the lamp holder as this will disrupt the smart bulb's network connection.
- Use in sealed fixtures with poor heat dissipation will result in a short life span and affect Bluetooth and Wi-Fi signal strength, so use in sealed fixtures is not recommended.
- Do not attempt to disassemble or modify the product, LED components etc. cannot be replaced.
- Do not clean it in water.
- Due to the variable nature of the LED components, the color and brightness of the Bulb may vary even for the same model.
- This product is not waterproof and should not be used in places where condensation may occur.
- Cleaning: Wipe with a dry cloth.
-Please note the following operating temperatures
　Operating temperature: -15℃ to 40℃
　Operating humidity: 10% to 80% RH (no condensation)