How to Display CO2 Concentration on Hub 3 Screen

• Related Product: SwitchBot Hub 3

1. Make sure your SwitchBot App version is up to date.

2. Make sure SwitchBot Hub 3 and CO2 Monitor have been added to your App and your device firmware version is up to date.

3. Please change Hub 3's temperature and humidity source in the following order:

• Launch SwitchBot app and log in.
• Tap your Hub 3.
• Tap "Displayed Info".
• Tap "Environmental Data Source".
• Choose CO2 Monitor and tap "confirm".

Important Note:

1. The Hub 3 itself cannot measure CO2. To display CO2 concentration, we kindly ask you to purchase our Meter Pro (CO2 Monitor).

2. After displaying data from CO2 Monitor on the hub 3 screen, the data from the hub 3 itself can only be viewed on the SwitchBot App.

3. Currently, it is not possible to display the CO2 values on Hub 3 display. Instead, the CO2 concentration will be shown using (green, orange, and red) icons. We appreciate your understanding.

Green: Good 400~1000ppm

Orange: Moderate 1000~1400ppm

Red: Poor 1400~2000ppm

If you have any questions, please contact us via SwitchBot App -> Profile -> Support ->Feedback.