How to Add Infrared Appliances to SwitchBot Hub Mini?

• Related Products: SwitchBot Hub Mini 

• SwitchBot App Version: 9.3 or newer 

• Firmware Version: 5.7-4.0 or newer

2. Learning the home appliance remote control by going to SwitchBot App -> Hub Mini -> Add the remote control -> select the IR Appliances.

3. Since the learning method may differ depending on the model number of the infrared remote control, we will guide you through the following four learning modes "Smart Matching", "Select Manually", "Learn Buttons" and "Others".

"Smart Matching"

• Select the appropriate Hub Mini
• Tap the "+" in the center right of the screen.
• Select Home Appliances
• Tap Remote Control Auto Learn
• Move the home appliance remote control closer to Hub Mini and press the power button.
• Test the template that came out until it works
• Save remote control that works flawlessly

"Select Manually" 

• Select the appropriate Hub Mini
• Tap the "+" in the center right of the screen.
• Select Home Appliances
• Tap Remote Control Manual Learning
• Search by entering manufacturer and model number
• Test the template that comes out
• If it works fine, save the remote

"Learn Buttons" 

• Select the appropriate Hub Mini
• Tap "Add Remote"
• Select Home Appliances
• Tap the button Learn on the remote control
• Learn each button one by one
• Save Remote Control

"Others" 

In "Others" mode, you can freely add buttons for the remote control, and you can also freely name the learned buttons. It is most recommended for those who have a DIY remote control or button.

• Slide to the bottom of the IR Appliances list, then tap More. Give your button a name and start learning.
• After the indicator lamp in the upper left corner of the Hub Mini unit turns off, press the remote control button once and wait until the indicator lamp flashes.
• If the button is recognized, you will see a success suggestion, tap "Test" to check if the appliance is actually working. If it doesn't respond, re-register with "Learn Again". After learning all the buttons, name and save the remote control. This completes the registration.
• For Others modes and custom-added buttons, it is not possible to set the button name as a number from 1 to 100. Example: Button name: 1 (x), Button name: N1 (√)

Air conditioner customization mode

Please refer to the following because the customization mode of the air conditioner is different from the customization mode of ordinary home appliances.

How to register the air conditioner remote control in "Customize"