Updated: Jan 18th, 2023

  • Applicable Products: SwitchBot Bot
In case you forgot your SwitchBot Bot device password or your device can not work properly, you can follow the steps to reset:
  1. Open your device cover from the front.
  2. Short-press the button in the corner once. (Do not hold down)
  3. Close the cover.
Resetting is now complete.
※All settings will be removed, including timers, action mode, and password.
※If you press and hold the reset button, it will enter firmware recovery mode and you will not be able to reset it.
You will see a popup as shown in the figure above. If necessary, please follow guidance to perform a firmware recovery. Firmware recovery mode lasts for two minutes, and will be canceled if your device's battery is removed or inserted during this period. A second press of the reset button will reset your device.




Article is closed for comments.