Fonction du Capteur de Lumière du SwitchBot Curtain 3

Last Updated：2023 Dec 22

• Related Products: SwitchBot Curtain 3
• SwitchBot App Version: 7.9 or newer
• Firmware Version: 0.9 or newer

1． Make sure your SwitchBot App version is up to date.

2． Make sure SwitchBot Curtain 3 has been added to your App and your device firmware version is up to date. If you need the latest version, please contact us via SwitchBot App > Profile > Help & Feedback >Feedback.

3． Unlike SwitchBot Curtains from previous generations, SwitchBot Curtain 3 does not have an integrated light sensor. However, once connected to a SwitchBot Solar Panel, SwitchBot Curtain 3 can utilize the illumination data from the panel to automate its opening and closing functions. Please ensure that SwitchBot Curtain 3 is connected to the SwitchBot Solar Panel before attempting to use the light sensor feature.

4． Please configure the light sensor to manage the opening and closing in the following order.

• Launch the SwitchBot App.
  
• Tap the relevant SwitchBot Curtain 3.
• If the Action Panel Settings are enabled, tap "More".
• Tap "Light Sensor" at the bottom of the page of the SwitchBot Curtain 3.
  
• Tap "Automation" at the bottom of the page.
  
• Tap "Add" at the bottom of the page.
  
• Set the Condition.
  
• Set the Action.
  
• Set the Valid Period and Repeat Time if needed.
  
• QuietDrift mode has been enabled automatically. Please deactivate it if it is not required.
  
• Save.

5． You can set up to two Automations open/close actions with the light sensor. Please take note of this limitation.

Remarque : Les journaux du rideau n'indiquent pas l'automatisation de l'ouverture et de la fermeture par le capteur de lumière.

6． If you have any questions, please contact us via SwitchBot App > Profile > Help & Feedback >Feedback.