• Applicable product: SwitchBot Bot
  • SwitchBot App version: 6.11 or newer
  • Device firmware version: below 6.3

 

Go to Bot Settings - Password & Mode, we can set the mode to Customized Mode. Then we can see there are three options below: Action treated as "ON", Action treated as "OFF", and Stop Action.

We should consider action 'ON' and 'OFF' as two individual buttons that can be applied with different commands. Stop Action will stop the Bot from working.

 

For example:

mceclip0.png On the 'ON' action, we set the Bot to do the pressing repeatedly every 3 seconds, with no holding time for each press.
mceclip1.png On the 'OFF' action, we set the Bot to do the pressing 4 times. Each press will last for 3 seconds, with 1-second interval in between. 

Lark20210824-175403.jpg

Now the action 'ON' and 'OFF' have been applied with different commands. On the homepage, we will see there are two buttons for the Bot. When we tap the button 'ON', the Bot will do the pressing repeatedly every 3 seconds, with no holding time. When we tap the button 'OFF', it will do the job accordingly.

 

These are two simple examples of setting the commands for the Bot under the Customized Mode. With this accessibility, we can create more commands for the Bot to meet our requirements in daily life.

 

If you are interested, please visit the article How to Receive the Customized Mode for the SwitchBot Bot? to upgrade the Bot.

 

For further assistance, please feel free to contact support@wondertechlabs.com.

Comments

0 comments

Please sign in to leave a comment.