SwitchBot RGBICWW Ceiling Light Matter Setup (Android)

• Related Product: SwitchBot RGBICWW Ceiling Light

Preparation

Before setting up devices using Matter, you will need the following:

• SwitchBot RGBICWW Ceiling Light
• Android Phone
• Google Nest Hub 47.9.4 or newer

Setup

Method 1: Directly Add SwitchBot RGBICWW Ceiling Light to Google Home

You can add RGBICWW Ceiling Light to Google Home without using the SwitchBot app. Turn the RGBICWW Ceiling Light on and off five times in a row, with each interval within 3 seconds. Once the device flashes red, green, and blue in sequence, it will enter pairing mode. Then open Google Home App -> Tap "Device" at the bottom of the menu bar -> Tap "Add" -> Tap "Matter-enabled device" -> Scan the OR code located on the RGBICWW Ceiling Light body to continue the whole process.

Method 2: Add RGBICWW Ceiling Light to Google Home through SwitchBot App

1. Make sure your SwitchBot App version is up to date.

2. Make sure SwitchBot RGBICWW Ceiling Light has been added to your App and your device firmware version is up to date.

3. Make sure all devices (your smartphone, Google Nest Hub, and RGBICWW Ceiling Light) are connected to the same 2.4 GHz Wi-Fi network.

4. Copy the setup code by going to SwitchBot App -> Your RGBICWW Ceiling Light -> Gear Icon (Settings screen) -> Matter Setup.

5. On the "How to Set Up Matter" screen, follow the on-screen instructions to copy the Matter setup code.

6. Open Google Home App -> Tap "Devices" at the bottom of the menu bar -> Tap "Add" -> Tap "Matter-enabled device" -> paste the code to continue the setup process.