Use Responsibly. Read all instructions and safety information before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Maintaining Your SwitchBot (the Bot)
Use your SwitchBot (the Bot) ("Device") only in indoor, dry environments. Do not use your Device near sinks or other wet locations. Take care not to spill any food or liquid on your Device and do not put any object filled with a liquid, such as a vase, on or near your Device. If your Device does get wet, carefully unplug the Device without getting your hands wet and wait for the Device to dry completely before plugging it in again. Do not attempt to dry your Device with an external heat source, such as a microwave oven or hair dryer.
Only handle your SwitchBot (the Bot) with clean hands. Remove your Device from an outlet before cleaning. Clean the Device with a soft cloth. Clean the device with a soft cloth that is slightly damp with water and a touch of rubbing alcohol; be careful not to wipe it with anything abrasive or to use any harsh chemicals.
Do not expose your Device to steam, extreme heat or cold. For example, do not plug in your Device near any heat sources such as space heaters, heater vents, radiators, stoves, or other things that produce heat. For example, do not install your SwitchBot (the Bot) near any heat sources such as space heaters, heater vents, radiators, stoves, or other things that produce heat. See below for operating temperatures for the Device.
If you wish to turn off your Device, open the top cover and take out the battery. To turn your Device back on, open the top cover and insert the battery.again. If your SwitchBot (the Bot) appears damaged, discontinue use immediately.
Your SwitchBot (the Bot) may get warm during normal use. To reduce the risk of overheating or heat-related injuries, keep the SwitchBot (the Bot) well ventilated and use care when handling it.
Servicing Your Device
If your device needs service, please contact SwitchBot Customer Support. Contact details can be found at https://www.switch-bot.com/support.
Faulty service may void the warranty.
Other Safety Considerations
Your SwitchBot (the Bot) is not intended for use with medical or life support equipment. Accordingly, your SwitchBot (the Bot) should not be used to supply power to, or control the on and off statuses of, medical or life support equipment.
If your SwitchBot (the Bot) is used in a way not specified by the manufacturer, any protection provided by the equipment may be impaired.
Do not use your SwitchBot (the Bot) to operate equipment where inaccurate timing or accidental on/off commands could be dangerous (e.g. saunas, sunlamps, etc.).
Do not use your SwitchBot (the Bot) to operate equipment where continuous or unsupervised operation could be dangerous (e.g. stoves, heaters, etc.).
Only for use in dry rooms.
Small parts contained in your Device may present a choking hazard to small children.
SwitchBot (the Bot) generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
FCC Compliance Statement
The SwitchBot (the Bot) (the "Product") complies with part 15 of the FCC Rules. Operation of each Product is subject to the following two conditions: (1) this Product may not cause harmful interference, and (2) this Product must accept any interference received, including interference that may cause undesired operation.
Note: This Product has been tested and found to comply with the limits for a Class B digital device or external switching power supply, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could make the Product no longer comply with the FCC Rules.
The SwitchBot (the Bot) meets the FCC Radio Frequency Emission Guidelines and is certified with the FCC. Information on this Product is on file with the FCC and can be found by inputting such Product's FCC ID into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Product is below the radio frequency exposure limits set by the FCC. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body. It is advised to use the Product in such a manner that minimizes the potential for human contact during normal operation.
Recycling the SwitchBot (the Bot) Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Product in accordance with your local laws and regulations. For information about recycling, contact us at https://www.switch-bot.com/support.
Model Number: SWITCHBOT-S1
Power: Battery, CR2
Connectivity: BLE 2402-2480 MHz
Operating temperature: 50°F to 113°F (10°C to 45°C)
Operating humidity: 40%RH to 75%RH
Please read the terms found at https://www.switch-bot.com/support.
1-Year Limited Warranty
This Warranty for the SwitchBot (the Bot) (the "Device") is provided by Wonderlabs, Inc., 2035 Sunset Lake Road, Suite B2, Newark, DE 19702, United States. The provider of this warranty is sometimes referred to herein as "we".
We warrant the Device against defects in materials and workmanship under ordinary consumer use for one year from the date of original retail purchase. During this warranty period, if a defect arises in the Device, and you follow the instructions for returning the Device, we will at our option, to the extent permitted by law, either (i) repair the Device using either new or refurbished parts, (ii) replace the Device with a new or refurbished Device that is equivalent to the Device to be replaced, or (iii) refund to you all or part of the purchase price of the Device. This limited warranty applies, to the extent permitted by law, to any repair, replacement part or replacement device for the remainder of the original warranty period or for ninety days, whichever period is longer. All replaced parts and Devices for which a refund is given shall become our property. This limited warranty applies only to hardware components of the Device that are not subject to accident, misuse, neglect, fire or damage from other external causes, alteration, repair, or commercial use.
Instructions.For specific instructions about how to obtain warranty service for your Device, please contact Customer Service using the contact information provided below. In general, you will need to deliver your Device in either its original packaging or in equally protective packaging to the address specified by Customer Service.
Limitations. TO THE EXTENT PERMITTED BY LAW, THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES, AND WE SPECIFICALLY DISCLAIM ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND AGAINST HIDDEN OR LATENT DEFECTS. IF WE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY AND TO REPAIR OR REPLACEMENT SERVICE.
SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG A STATUTORY OR IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WE ARE NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY. IN SOME JURISDICTIONS THE FOREGOING LIMITATION DOES NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS, OR ANY STATUTORY LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR OMISSIONS, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. THIS "LIMITATIONS" SECTION DOES NOT APPLY TO CUSTOMERS IN THE EUROPEAN UNION.
This limited warranty gives you specific rights. You may have additional rights under applicable law, and this limited warranty does not affect such rights.