Last updated: September 29, 2022
- Applicable products: Meter, Meter Plus
- SwitchBot app version: V6.14 or newer
- Firmware version: Meter V2.7 or newer, Meter Plus V0.6 or newer
Long press the button on the back of the Meter/Meter Plus for 15 seconds, until the screen starts flickering or flashing. Please note the Bluetooth icon on the LED display will start flashing shortly after the press, just ignore it and keep pressing.
Release the button and wait. The device will stop flashing and go blank after a few seconds.
When the screen goes back on, the Meter has been reset successfully.
After the factory resetting, local on-board historical data, calibration, and the alert condition settings will be lost. Data cached in the App or stored on the Cloud will remain intact.
The temperature displays in Celsius by default. Short press the button on the back of the Meter for Fahrenheit as you need.