Applies to: SwitchBot Floor Cleaning Robot S10, SwitchBot Floor Cleaning Robot S20, and SwitchBot Floor Cleaning Robot S30
Carry the robot to the floor you want to clean. If that floor has no Water Station, fill the robot with water before moving it. If each floor has a Water Station, mark each station in the SwitchBot app.
Add the robot in the SwitchBot app, update the app to the latest version (9.3 or later), and install the latest firmware available for your model.
If you have one Water Station
-
Mark the Water Station in the app.
Related Posts:
- Before moving the robot, open your robot’s cleaning controls. On S10 or S20, open Vac & Mop and turn on Water Station Not Marked (Beta). On S30, open the cleaning mode menu and turn on No Station Mode (Beta).
- Wait for the robot to fill with water, then carry it to the floor you want to clean and start vacuuming and mopping. The task stops if the robot runs out of clean water.
- When cleaning finishes, carry the robot back to the station and use the app to empty the dustbin and dry the mop.
If you have a Water Station on each floor
-
Mark each floor’s Water Station in the app. On S10 or S20, open your robot and go to Functions > Settings > Mark Water Station Position. To remove a marked station, use the three-dot menu in the upper-right corner.
Related Posts:
- Carry the robot to the floor you want to clean and select a cleaning mode in the app. After vacuuming and mopping, the robot returns to the marked Water Station on that floor to drain dirty water and wash the mop.
- If that floor has no station for dust collection and drying, carry the robot back to the Auto-empty Station (S10 or S20) or Multi-Functional Station (S30) and use the app to empty the dustbin and dry the mop.
On a floor without a station for dust collection and drying, the robot may announce that it could not return to the station. This is expected.
Comments
0 comments
Please sign in to leave a comment.