How to Re-pair the Floor Cleaning Robot S10 with the Auto-empty Station

Last Updated：2024 Jul 24

• Related Products: SwitchBot Floor Cleaning Robot S10

1. Make sure that the auto-empty station is powered on.

2. Make sure that the S10 is powered on by removing the main unit's faceplate and switching the power to I.

3. Manually dock the S10 to the auto-empty station and make sure the charging terminals are fully contacted.

4. Press the home button on the main unit of the S10 for 6 seconds, and you will hear a voice from the S10 saying, "Entering Bluetooth pairing mode".

5. Open the lid of the auto-empty station and long press the Bluetooth button for 6 seconds. The indicator on the auto-empty station will change from orange to flashing white to enter the Bluetooth pairing mode.

6. Wait 5 to 10 seconds, then the S10 will announce the success of Bluetooth pairing.

7. If pairing fails, restart the S10 and try again following the steps above.