About LED Indicator Light on SwitchBot Floor Cleaning Robot S10 Water Station

Last Updated：2024 Apr 22

• Related Products: SwitchBot Floor Cleaning Robot S10

1. Before marking the water station for the first time, press and hold the bluetooth button on the side for 2 seconds. The indicator will flash white to show that the water station has been activated.

2. When using the Type-C charging cable to charge the water station, the indicator will light up white. Once fully charged, the indicator will turn off.

3. The indicator stays lit in white while the S10 is filling up with water at the water station and then goes out after fetching it.

4. If there is an issue with the water station, the indicator will quickly flash white.

5. There is a reset hole on the side of the water station. Press with the reset pin then the indicator will flash for three seconds to initialize the water station. To use the water station again, press and hold the Bluetooth button for 2 seconds to activate it.