How to Set Up SwitchBot Floor Cleaning Robot S10 and Mark Water Station Position

Last Updated：2024 Apr 22

• Related Products: SwitchBot Floor Cleaning Robot S10
• SwitchBot App Version: 8.3 or newer

1. Make sure your SwitchBot App version is up to date.

2. Plug the power cable of SwitchBot Floor Cleaning Robot S10's Auto-empty station.

3. Please set it up in the following order.

• Launch SwitchBot App and login
• Tap the + icon in the upper right corner then tap "Add Device".
• Tap "Floor Cleaning Robot S10" under "Household"
• Remove the faceplate of the S10 robot body and switch on the power to "I".
• Tap "Next."
• Long press the home button and mode switch button for three seconds, you will hear a voice from the S10 saying, "Wi-Fi settings have been reset".
• Tap "Connect to Device".
• Device detection will be performed automatically.
• Input the 2.4GHz Wi-Fi SSID and password, then tap "Next".
• Once the network connection is complete, you will see a message that says "Added."
• Set your favorite name and room, then tap "Finish".

4. Mark water station position.

• Remove the sticker on the infrared receiver of the water station body.
• Activate the water station by pressing and holding the bluetooth button on the side of the station for a couple of seconds.
• Launch your SwitchBot App and tap your S10.
• Tap "Functions" in the lower left corner.
• Tap "Settings".
• Tap "Mark Water Station Position"
• Drag the water drop mark icon to the front of the actual location of Water Station.
• Tap "Mark".
• The S10 will automatically move to the water station and mark it.

5. If you have any questions, please contact us via SwitchBot App > Profile > Help & Feedback >Feedback.