Introduction of Rechargeable Battery for SwitchBot Lock Pro

1. Both sides of the rechargeable battery A and B are powered independently of each other, and if one side runs out of battery power, the other side can continue to power the other side, and at the same time, only the one with a dead battery can be charged independently.

2. This section describes the battery drain order when using rechargeable batteries A and B at the same time. If rechargeable battery A is inserted into the Lock Pro first, the Lock Pro will switch on and start draining battery A. When A is at low power, then rechargeable battery B, which is inserted next, will relay power (and vice versa). You can also check the battery level of rechargeable batteries A and B in SwitchBot App -> Lock Pro -> Gear mark -> Firmware & Battery.

3. The SwitchBot rechargeable battery for the Lock Pro is sold separately on the official SwitchBot website.

4. When charging, please use a charging adapter with a current of 1A or 2A.

Related Post: Does SwitchBot Lock Pro Work with Non-SwitchBot Rechargeable Batteries?