Last Updated: 2023 Oct 20

  • Related Products: SwitchBot Hub 2
  • SwitchBot App Version: 7.7 or newer
  • Firmware Version: 1.0-0.9 or later

1. Before registering the home appliance remote control, please add Hub 2 to the SwitchBot App first.

Related Post: Setting Up Hub 2

2. Open SwitchBot App, please register the home appliance remote control in the order of "+" in the center right of the corresponding Hub →2 screen.

3. Since the learning method may differ depending on the model number of the infrared remote control, we will guide you through the following four learning modes "Smart Learning / Automatic Learning", "Search Manufacturer / Manual Learning", "Customization / Button Learning" and "Other".

"Smart Learning" (remote control automatic learning)

  • Select the appropriate Hub 2
  • Tap the "+" in the center right of the screen.
  • Select Home Appliances
  • Tap Remote Control Auto Learn
  • Move the home appliance remote control closer to Hub 2 and press the power button.
  • Test the template that came out until it works
  • Save remote control that works flawlessly

"Search Manufacturer" (remote control manual learning)

  • Select the appropriate Hub 2
  • Tap the "+" in the center right of the screen.
  • Select Home Appliances
  • Tap Remote Control Manual Learning
  • Search by entering manufacturer and model number
  • Test the template that comes out
  • If it works fine, save the remote

"Customize" (remote control button learning)

  • Select the appropriate Hub 2
  • Tap "Add Remote"
  • Select Home Appliances
  • Tap the button Learn on the remote control
  • Learn each button one by one
  • Save Remote Control

"Other" 

In "Other" mode, you can freely add buttons for the remote control, and you can also freely name the learned buttons. It is most recommended for those who have a DIY remote control or button.

  • Slide to the bottom of the device list, then tap More. Give your button a name and start learning.
  • After the indicator lamp in the upper left corner of the Hub 2 unit turns off, press the remote control button once and wait until the indicator lamp flashes.
  • If the button is recognized, you will see a success suggestion, tap "Test" to check if the appliance is actually working. If it doesn't respond, re-register with "Learn Again". After learning all the buttons, name and save the remote control. This completes the registration.

Air conditioner customization mode

Please refer to the following because the customization mode of the air conditioner is different from the customization mode of ordinary home appliances.

How to register the air conditioner remote control in "Customize"

Comments

0 comments

Please sign in to leave a comment.