Last Updated:2023 Dec 22

  • Related Products: SwitchBot Curtain 3
  • SwitchBot App Version: 7.9 or newer
  • Firmware Version: 0.9 or newer

1. Make sure your SwitchBot App version is up to date.

2. Make sure SwitchBot Curtain 3 has been added to your App and your device firmware version is up to date. If you need the latest version, please contact us via SwitchBot App > Profile > Help & Feedback >Feedback.

3. Unlike SwitchBot Curtains from previous generations, SwitchBot Curtain 3 does not have an integrated light sensor. However, once connected to a SwitchBot Solar Panel, SwitchBot Curtain 3 can utilize the illumination data from the panel to automate its opening and closing functions. Please ensure that SwitchBot Curtain 3 is connected to the SwitchBot Solar Panel before attempting to use the light sensor feature.

4. Please configure the light sensor to manage the opening and closing in the following order.

  • Launch the SwitchBot App.
  • Tap the relevant SwitchBot Curtain 3.
  • If the Action Panel Settings are enabled, tap "More".
  • Tap "Light Sensor" at the bottom of the page of the SwitchBot Curtain 3.
  • Tap "Automation" at the bottom of the page.
  • Tap "Add" at the bottom of the page.
  • Set the Condition.
  • Set the Action.
  • Set the Valid Period and Repeat Time if needed.
  • QuietDrift mode has been enabled automatically. Please deactivate it if it is not required.
  • Save.

5. You can set up to two Automations open/close actions with the light sensor. Please take note of this limitation.

6. If you have any questions, please contact us via SwitchBot App > Profile > Help & Feedback >Feedback.

 

Comments

0 comments

Please sign in to leave a comment.