Instructions for Using Magnets With the SwitchBot Curtain 3 （U Rail）

Last Updated：2023 Aug 21

• Related Products: SwitchBot Curtain 3

1． Wipe the rail thoroughly before attaching the magnet.

2． Push your SwitchBot Curtain U Rail 3 to the fully closed position.

3． Peel off the tape liner on the back of your magnet.

4． Point the arrow to your curtains' closing direction, and stick it to your curtain track surface as shown in the picture below. Also, stick your magnet on the front of your curtain track, the same side of the SwitchBot logo on your device.

5． If your U rail track is embedded in the ceiling, point the arrow to your curtains' closing direction, and stick it to your curtain track as shown in the picture below. Also, stick your magnet to the ceiling on the same side as the SwitchBot logo on your device. Make sure the magnet is as close as possible to your SwitchBot Curtain's Main Unit.

6． After attaching the magnets, hang your curtain back in place and hide SwitchBot Curtain 3 behind your curtain fabric.

7． We will present you with a video demonstrating how to utilize the product. Should you have any inquiries, kindly log into the SwitchBot app, go to your profile, select "Help&Feedback", and click on "Feedback".