Model

Rail Type

Hook Wheel

Hook Wheel Attachment

Taiwan Ti Rail

Type B

__1.png

Must use on

Hook Wheel

__2.png

Must use on

Hook Wheel

Japan TOSO Elite

Type B

Assembled Hook Wheel upon delivery

Must use on

Hook Wheel

mceclip1.png

 

Before you install Curtain to the rail, please attach the Hook Wheel Attachment to the Hook Wheel.

Push the Hook Wheel Attachment all the way in. When they are firmly attached, you adjust them to a proper position to fit the rail's shape.

mceclip0.png

installing Curtain to Type B Rail

a. Remove the end cap of the curtain rail, using a screwdriver if necessary.

mceclip0.png

b. Close your curtain. Then detach the last curtain hook and remove the last curtain rail glider.

mceclip1.png

c. Insert the separate Hook into the curtain rail from the end. Pull the Hook towards one side of the rail and tilt it. If the Hook stays inside the rail, proceed to the next step. If you try all the parts still do not work as expected, please contact our customer support at support@switch-bot.com

mceclip2.png

d. Insert both the Curtain's Main Body (with one Hook attached) and the separate Hook into the curtain rail from the end and attach the separate Hook back to the Main Body. The SwitchBot LOGO should face your room.

mceclip3.png

e. Put the curtain rail glider back to the rail. Then attach the curtain hook back to the glider.

mceclip4.png

f. Install the end cap back to the curtain rail, using a screwdriver if necessary.

mceclip5.png

Comments

0 comments

Article is closed for comments.